- Messages
- 6,754
- Reaction score
- 12,426
- Location
- ST.LOUIS
- Arrma RC's
- BigRock 4x4
- Mojave
- Notorious
- Senton 6s
- Senton 3s
- Typhon 6s
Imo hoons suck,all of them....I've tried the 85mm,100mm,107mm all no good for me.....the elevans start to Ballon at 90ish mph,cars on donuts at 100mph an all over the road.17mm 98mm tall grps are the best option,problem is they are to big an wide.......so here I just did it an looks like it'll work just fine........
So I did previously trim this body for another project,ran 119mph on 3s with this body on 1/8 metal chassis car....
1st I put typhon steering blocks an hubs instead of the stock detta ones....by doing this it narrows car 1/2in...front an rear..
Then I bout these 17mm adapters,narrowest ones I could find,plus a great product I've already ran these on another car
Here's what ya come up with,test it tomorrow
So I did previously trim this body for another project,ran 119mph on 3s with this body on 1/8 metal chassis car....
1st I put typhon steering blocks an hubs instead of the stock detta ones....by doing this it narrows car 1/2in...front an rear..
Then I bout these 17mm adapters,narrowest ones I could find,plus a great product I've already ran these on another car
Here's what ya come up with,test it tomorrow
Last edited: