Turn the the steering wheel and the tires don’t move. Everything else works just no steering.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Nope.Do you have another servo you can plug in to test?
Endpoints uhh no.Damn, ok switch the servo over to channel 2 and the servo should work with the throttle trigger instead. If that doesn't make the servo work then maybe it burned out? Did you set your endpoints prior to running your rig?
SMHProb burnt it up if you didnt set end points correctly. The servo doesn't know when to stop and overworks itself?
Servo doesn’t make any noise, yesterday I installed an aluminum servo mount, think I messed up something then?Chk connection on your receiver for servo. Also does servo make any noise at all when powered up. Try re-binding rx/tx
I just did waiting for a response.Im not sure but if its a new noto i would be email/calling horizon hobby customer service.
Should be good with that one. Just make sure you have a small gap underneath the servo. Bottom of servo should not be touching the chassisServo doesn’t make any noise, yesterday I installed an aluminum servo mount, think I messed up something then?
If I am buying a new servo is there anything else I will need with this one to get it working?https://www.amazon.com/LJWRC-DS3230...CVF4MQ0NK7NX&refRID=Y0CRNF5GCVF4MQ0NK7NX&th=1
Unfortunately I don't have that radio. Do you have the manual for it by chance? I'll check youtube to see if there's a how to videoGuys how do I set the end points on the slt3? The video you sent earlier doesn’t work.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!