Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I believe it should just pull out of the diff. Don't think there is a set screw? Didn't show one in the exploded view
Hi friends my drive rear has come off should I take the other wheel off or do I need to remove the motor etc to get to it ?
Thank you for your help appreciated !
Simon
Great advice it worked!Small pliers should do the trick. May need to release the arm to get in there. Unscrew the shock as well as the tierod.
Good advice thank youIf you hold the fitting you should be able to use a 2mm to unscrew the driveshaft Stub from the diff. when you put the new axle on you will need a long 2mm to screw it back in. MIP‘s are too short.
Great advice sorted !If you hold the fitting you should be able to use a 2mm to unscrew the driveshaft Stub from the diff. when you put the new axle on you will need a long 2mm to screw it back in. MIP‘s are too short.
Great thank you so muchI believe it should just pull out of the diff. Don't think there is a set screw? Didn't show one in the exploded view
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!