I'm replacing the brass bushings in my K6 steering with bearings. Do I need to remove the two screws on the bottom of the chassis going into the steering posts?
The post circled in blue is the one I am wondering if I need to remove the screw on the bottom of the chassis for.
The servo side seems to come loose but the other side seems secured. The bottom chassis screws for these posts are obviously Loctite.
The post circled in blue is the one I am wondering if I need to remove the screw on the bottom of the chassis for.
The servo side seems to come loose but the other side seems secured. The bottom chassis screws for these posts are obviously Loctite.