Big Rock Typhon 3s wing

[XplicitRC]

So I have my hands into many projects at the moments and wanting to tackle one last one real quick. I searched the forum for wing variances for the big rock and all I saw were V1 Outcast and granite wing. But seeing as all the 3S models are the same just about. Won’t the 3S Typhon wing be a direct fit with mount+wing/screw ect. ? Was looking and I know I have to modify the body a bit but is this possible? I looked on YouTube and only saw the few same videos posted on the forum. Thanks in advance

 

[Rowdyray]

In short, no. This is the video I used to put a wing on both my Granite and Big Rock. Has a parts list. The Typhon mount won't fit. I tried the other wings. The Outcast 4s wing looks and fits the best. Durable too.

 

[MrTitanium]

I’m in the process of installing the Kraton V1 wing on my BRCC. You’ll need the parts that follow:

(1) ARA320455*
(1) ARA480012*

*Revised to reflect Kraton V1, not V2.

See video below for details.

 

[XplicitRC]

I’m in the process of installing the Kraton V2 wing on my BRCC. You’ll need the parts that follow:

(1) ARA320631
(1) ARA480044

See video below for details.

The process is the same for this? I like the Kraton wing a lot better going to go this route thanks for the info

 

[MrTitanium]

Correction to my original post.

Yes. See below. I’ll post finished pics in that days that follow.

Make sure you use bulkhead 320399.

 

[XplicitRC]

Correction to my original post.

Yes. See below. I’ll post finished pics in that days that follow.

Make sure you use bulkhead 320399.

View attachment 326047

This bulkhead is direct fitment? And everything in above picture is the complete setup?

 

[Tex Koder]

This bulkhead is direct fitment? And everything in above picture is the complete setup?

It looks about right.
Yes.

 

[XplicitRC]

Correction to my original post.

Yes. See below. I’ll post finished pics in that days that follow.

Make sure you use bulkhead 320399.

View attachment 326047

Thanks looking forward to seeing how yours comes out while I wait for parts

 

[MrTitanium]

Here ya go. 95% done. Just need to drill new holes for the BRCC body mount and cut the rear of the body for clearance.

 

[overload]

I'd like to see how much body has to be cut, can we see a picture with the body on from the back? tia!

 

[Rowdyray]

I'll take a pic when I get home from work.

 

[Rowdyray]

It's not much that needs cutting. I followed the body line. The wing really protects the back corners of the body. This is the Granite body but, it's pretty much the same on the Big Rock. Hope that helps.

 

[quiznatodd bidness]

If you want to raise the height of the wing you can get a 3d print spacer between the mount and wing. -i thought the lower height looked goofy on my granite since the body mounts are made taller than the big rock. The spacer I used adds 10mm I think.

 

[King blitz]

So I have my hands into many projects at the moments and wanting to tackle one last one real quick. I searched the forum for wing variances for the big rock and all I saw were V1 Outcast and granite wing. But seeing as all the 3S models are the same just about. Won’t the 3S Typhon wing be a direct fit with mount+wing/screw ect. ? Was looking and I know I have to modify the body a bit but is this possible? I looked on YouTube and only saw the few same videos posted on the forum. Thanks in advance

Tons of wings out there for the Big Rock...Here is mine on my Big papa Long Rock speedster build

Here is another before I started my stretched speedster build

 

[XplicitRC]

I like it I like…. What parts did you happen to use to mount yours? That thing looks smooth ,I like the Kraton wing the best I have to get the part numbers for the screws for the above setup.

 

[XplicitRC]

Here ya go. 95% done. Just need to drill new holes for the BRCC body mount and cut the rear of the body for clearance.

View attachment 326210

View attachment 326211

View attachment 326208

View attachment 326209

View attachment 326212

View attachment 326213

View attachment 326215

For the above diagram the part number is AR721316 size is 3x16mm ,in your pictures you say to use 3x20mm ,typo or is that a different part number for that size?