Thunderbird1983
Member
- Messages
- 51
- Reaction score
- 29
- Arrma RC's
- 4x4-Mega
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Looks good I originally attached the first ones that were thin plexiglass that i bought at Hobby Lobby with double sided tape but as you know mine cracked and dirt made tape loosen up. So on the aluminum one i put shield up to lower arm and looked for deepest part of plastic to drill a small hole i used a #45 drill bit. There’s two spot on arm for doing this. Put a little tape on shield after i drilled holes in them then stuck them onto lower arm and then carefully drilled hole into lower arm and attached with screws. I have found that these shields do work well and keep dirt out of the hub bearing as well as grass out too. I’ll have to update my listing on ebay because the plastic ones aren’t durable enough I’ll just send them the aluminum ones instead.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!