Which 24mm wheel wrench?

[dure16]

I’m looking to upgrade from the included 24mm wheel wrench.

I see a million options online but I want to avoid cheap aluminum. It’s hard to tell which wrenches are good.

Any recommendations?

 

[MAVERICK@2]

I prefer to just use a 3/8 drive ratchet and socket from the garage for the bigger stuff

 

[Moirae]

I'm a noob and know nothing about tools. With that said, I bought this and this and they work great. I bought some more sockets from home depot for under 4$ for the 6s stuff and they also work great. Good buy.

 

[Warby]

For 17mm wheel nuts I use a 1/2 drive, single hex socket. Works great. Doesn't damage the nut. Would recommend the same for 24mm.

Edit: same as suggested above

 

[dure16]

Well, I bought this one and it felt great. Works well. Thought it was a winner.

But it is soft aluminum and is getting loose after only a handful of uses. Stay away.

I guess I'll go the socket route and get that good tool steel. Thanks!

 

[djrahbee]

Well, I bought this one and it felt great. Works well. Thought it was a winner.

But it is soft aluminum and is getting loose after only a handful of uses. Stay away.

I guess I'll go the socket route and get that good tool steel. Thanks!

I have a 1/2 inch drive 17mm and 24mm socket and impact with adapter for getting them off then I use the hand tool to tighten. That being said I was having trouble getting the 24mm nuts off of the Proline Trenchers and got the M2C nuts and problem solved. The tool was hitting the fake plastic nuts molded to the wheel.

 

[Warby]

I use these

 

[Mike'sGN-Kraton]

Yep... same here, those are my go to tools!!! Mike