crazyjr
Active Member
- Messages
- 95
- Reaction score
- 60
- Arrma RC's
- BigRock 4x4
I found this fan on Amazon, 30 x30 x 15 MM fan wondering if anyone had experience with it. Specifically how it handles rough driving and impacts.
https://www.amazon.com/SUNON-Brushl...3-4342-9c5c-4ab254206383&ref_=pd_gw_ci_mcx_mi
The concern i have is that it's a mag-lev type (magnetic levitation bearing) and wondering how it'd handle an RC environment. all other specs seem good, 5 volt,/0.04 amp/0.4w all seem within the ability of the Onboard BEC (no external battery or a T off from the main battery) just need to wire up a servo plug. The reason i'm considering it is #1 it's claimed near silent (around 20db) and it can move a lot of air (4.8 CFM). this will be going on a Arrma Big Rock BLX 100 with an adapter 3d printed by a friend with a file found on these forums.
Once again thank you for any info you might can spare. Even if nobody knows, not against trying it myself
https://www.amazon.com/SUNON-Brushl...3-4342-9c5c-4ab254206383&ref_=pd_gw_ci_mcx_mi
The concern i have is that it's a mag-lev type (magnetic levitation bearing) and wondering how it'd handle an RC environment. all other specs seem good, 5 volt,/0.04 amp/0.4w all seem within the ability of the Onboard BEC (no external battery or a T off from the main battery) just need to wire up a servo plug. The reason i'm considering it is #1 it's claimed near silent (around 20db) and it can move a lot of air (4.8 CFM). this will be going on a Arrma Big Rock BLX 100 with an adapter 3d printed by a friend with a file found on these forums.
Once again thank you for any info you might can spare. Even if nobody knows, not against trying it myself