m71295
Fairly New Member
- Messages
- 23
- Reaction score
- 7
Hi everyone ...looking for advice here. We were driving and the rc had lost control on a left turn, we thought it was the servo and therefore we replaced it with the Savox 1210SG. Towards the end of the replacement the rc started to hit the throttle by itself which made no sense as no one was touching the throttle. When we screwed in the final bits we tested it and the red light started blinking on the esc, we changed our battery but it still was blinking, any advice on what it could be? Could we have damaged the esc while handling? Could it be maybe that we messed up the connection in the box ? I'm having suspicions that the stock may be okay. I tried to improvise with the servo saver since the new servo is 25T and I had a successful attempt (I drilled the original servo saver to get the cap off and replaced the cap with a 25T cap) but now I'm regretting it since the original saver is already ruined.
Does someone know what may be the issue ? Newbies here but I do understand technology so I can understand what may have happened. I just need your experience and advise guys!
UPDATE: Blinking light was from the remote. The throttle wasn`t set up in the middle. Looking for new servo saver now.
Does someone know what may be the issue ? Newbies here but I do understand technology so I can understand what may have happened. I just need your experience and advise guys!
UPDATE: Blinking light was from the remote. The throttle wasn`t set up in the middle. Looking for new servo saver now.
Last edited: