samintrepid
Active Member
- Messages
- 110
- Reaction score
- 105
- Arrma RC's
- BigRock 4x4
I have install the Hot Racing hub 17mm with 10mm extension on each side
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I have install the Hot Racing hub 17mm with 10mm extension on each side
I have install the Hot Racing hub 17mm with 10mm extension on each side
Hello mOnk, thank you my friend, I use the typhon 6s shock with same spring and 40w front and 35w rear. I use a plastic cover any, use slice for make a sleeve inside the hollow ball cap shock because it 4mm and typhhon 3s use 3mm boltWhat shocks are you running? Your car looks sick ????
No Augustin805, no wobble with HR adaptor run perfect. The problem are probaly your tire or foam.Samintrepid do you have any wobble problem with those hot racing adapters?
At first I use nothing Adam but after couple week I see the rub and install a plastic washer of 1/16" thick approximately and now no rubSamintrepid do you use anything in the shock arms to stop the shocks from rubbing or are they OK bolted on like the stock shocks?
Thank you my friend, me too I have order 2 set front and rearThe front arms are available for the Typhon! I ordered 2 sets this morning!
If anyone needs a $5 coupon for t-bone here is my refer a friend link
http://i.refs.cc/MSdjvX0V?smile_ref...hbSIsInNtaWxlX2N1c3RvbWVyX2lkIjoyNDg0MTAzMjd9
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!