I've been having an issue with my big rock. It has happened a few times already, but the front and rear axles seem to come unscrewed at the stub somehow and it sends my wheels off with everything attached to it. I screwed them both back in after it happened and I put loctite on the screws.
But is there any reason that this is happening?
Should I take apart the others and loctite them as well?
Should I just look at getting some new axles?
The only modifications I have made to the car are as follows:
-17mm hex conversion
-18T pinion gear
-Metal spur gear
Wondering if anything that I did could be causing this issue.
I was already considering getting some of those GPM or RCAWD axles from eBay. As I have also had my axles pop apart a couple of times as well.
Thanks in advance.
But is there any reason that this is happening?
Should I take apart the others and loctite them as well?
Should I just look at getting some new axles?
The only modifications I have made to the car are as follows:
-17mm hex conversion
-18T pinion gear
-Metal spur gear
Wondering if anything that I did could be causing this issue.
I was already considering getting some of those GPM or RCAWD axles from eBay. As I have also had my axles pop apart a couple of times as well.
Thanks in advance.