Burned up slipper clutch and motor temp hit 220 F

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

socrates7431

Fairly New Member
Messages
24
Reaction score
10
Arrma RC's
  1. Outcast 6s
  2. Typhon 3s
Burned up the slipper clutch on my arrma typhon 3s in the process of three runs on 3s battery I noticed the excessive heat from the motor area. Checked the temp on the 2nd and 3rd when I noticed the temp of the motor at 220f. So I took apart the motor assembly and noticed my slipper burned up.

I plan replacing all the parts on the slipper and the all the bearings. Should I also replace the motor?

All and any help on this greatly appreciated.
 
Burned up the slipper clutch on my arrma typhon 3s in the process of three runs on 3s battery I noticed the excessive heat from the motor area. Checked the temp on the 2nd and 3rd when I noticed the temp of the motor at 220f. So I took apart the motor assembly and noticed my slipper burned up.

I plan replacing all the parts on the slipper and the all the bearings. Should I also replace the motor?

All and any help on this greatly appreciated.
If the motor still works I wouldn't replace it.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top