Can anyone reply with a link on the correct motor bearings?

[basher27]

I have a few Arrma motors that I want to do preventative maintenance on and replace the motor bearings. I’m wondering if all three motors I have take the same size bearings.
Would you mind listing a link to the correct size so I know where to purchase them as well? Thank you for your time.
The motors I have are.
1 spektrum 3900 kv Vendetta
2 spektrum 3200kv. Granite
3 BLX 2400kv Big Rock 4S

 

[ZooKeeper]

My Granite 3s v2 and Typhon 6s v4 take a 5x16x5 bearing in the front of the can and a 5x13x4 in the rear of the can. These are both BLX motors, not Spektrum though.

I recommend Avid RC bearings.

 

[jkflow]

Start with Jim's and check motor bearings.

https://jimsbearings.com/collections/5x16x5


https://www.fasteddybearings.com/
https://jimsbearings.com/
https://www.avidrc.com/
https://trbrc.com/
https://www.acerracing.com/
https://www.vxb.com/Default.asp
https://www.bocabearings.com/

 

[oldguywnewtoy]

Don't have sizes for ya, but I use Ceramic Hybrids in my motors. Seem to hold up well.

 

[basher27]

My Granite 3s v2 and Typhon 6s v4 take a 5x16x5 bearing in the front of the can and a 5x13x4 in the rear of the can. These are both BLX motors, not Spektrum though.

I recommend Avid RC bearings.

So you are saying they both motors take the same size if I’m reading your reply correctly?

 

[ZooKeeper]

So you are saying they both motors take the same size if I’m reading your reply correctly?

Yes. Both are BLX motors though.