parcou
Premium Member!
Premium Member
Hospitality Award
Rig of the Month Winner
Build Thread Contributor
- Messages
- 6,225
- Reaction score
- 9,127
- Location
- Memphis, TN
- Arrma RC's
- BigRock
- Felony
- Fireteam
- Granite
- Infraction
- Kraton EXB
- Talion EXB
- Typhon TLR
- Vorteks
Dealing with a 780kv motor
I came stock with 13T and had to take a LARGE screwdriver to wedge it off the motor rotor. I have a 16T 1.5 mod to put back on, and that is the correct opinion.
Issue: I can get about 1/4 of it on, but it will not slip entirely onto the rotor. After testing the stock pinion, I found that it was the same as the new one if I wanted to put it back on.
Question any tips on how to put the pinion back on the motor's shaft? Usually, I'd take a hammer and beat it on, but I won't do that not to damage the motor can, rotor, or internal.
Any suggestions?
I came stock with 13T and had to take a LARGE screwdriver to wedge it off the motor rotor. I have a 16T 1.5 mod to put back on, and that is the correct opinion.
Issue: I can get about 1/4 of it on, but it will not slip entirely onto the rotor. After testing the stock pinion, I found that it was the same as the new one if I wanted to put it back on.
Question any tips on how to put the pinion back on the motor's shaft? Usually, I'd take a hammer and beat it on, but I won't do that not to damage the motor can, rotor, or internal.
Any suggestions?