Kraton Can someone help me with their ramp building knowledge ?

[hungrybird]

It’s time to make a ramp to support the Kraton 6s . Any ideas on measurements to support the size of the 1/8 RC ? I wanted to make a ramp out of 1/2” thick plywood and use a piano hinge to have both sides usable . I’m not sure if I should cut in half and put it together , make it less wide , or leave one side longer and one shorter in length . Either way it will work as a ramp . I ll use something on the sides like a rope or chain to adjust angle . Thanks for any ideas or knowledge on the situation . A ski ramp will number two, maybe , but this one I want to be able to fold up and keep it simple . I don’t want to move around or have a 2x4 and plywood heavy piece taking up space . Right now it’s a 1/2” drywall about 2’ to 2 1/2 ft long with two bricks and a wedge support under the front area .

 

[BruceRC]

Different than what I think you are looking for but I just recently built one, I put it in a thread here:

https://www.arrmaforum.com/threads/ramping-it-up.70512/

There are a lot of other threads to give you ideas throughout the AF. Good luck!

 

[RC Steve]

Here's some advice, make two of them and set them up side by side. Eight feet of ramp is hard to miss even at 40mph.

 

[Johnny b]

Here's some advice, make two of them and set them up side by side. Eight feet of ramp is hard to miss even at 40mph.

No it's not.

 

[kspitters]

No it's not.

Johnny, we’re talking about it being hard to miss for people not under constant edible influence

 

[HoppyHop84]

No it's not.

Real talk

 

[hungrybird]

Different than what I think you are looking for but I just recently built one, I put it in a thread here:

https://www.arrmaforum.com/threads/ramping-it-up.70512/

There are a lot of other threads to give you ideas throughout the AF. Good luck!

Thanks Bruce

 

[joshludden]

I've read that it's good to have 2x the run up vs the height. So I built mine 24" for the run up, 12" for the height. You also want a slight curve in the surface

 

[hungrybird]

Johnny, we’re talking about it being hard to miss for people not under constant edible influence

I won’t miss under the edibles .

I've read that it's good to have 2x the run up vs the height. So I built mine 24" for the run up, 12" for the height. You also want a slight curve in the surface

View attachment 366444

View attachment 366445

Solid build

 

[NitroK]

 

[hungrybird]

Thank you.