Charger
Fairly New Member
- Messages
- 15
- Reaction score
- 5
First day on Forum and first time RC owner, so be easy on me. Before I ran it the first time, I checked all the chassis screws for tightness.
Noticed a chassis screw missing and think I found the one that was missing. I have a new V5 Typhon and looking at the bottom of the chassis plate, just behind the opening showing the gear is another small square opening and behind that is a hole where a screw is missing. When you try to tighten the screw, there is nothing there to screw into. The hole is directly under the chassis brace on the rear and about an inch or so behind the front chassis screw. The top side of the hole does not show any signs of having a nut or something mounted to it. Without removing the brace, I can't tell if there is a threaded hole in the bottom of the brace for the screw to go into. If so, maybe one I found is not the correct one and to short.There is about 1/2" space from the hole to the brace. Thanks dm
Noticed a chassis screw missing and think I found the one that was missing. I have a new V5 Typhon and looking at the bottom of the chassis plate, just behind the opening showing the gear is another small square opening and behind that is a hole where a screw is missing. When you try to tighten the screw, there is nothing there to screw into. The hole is directly under the chassis brace on the rear and about an inch or so behind the front chassis screw. The top side of the hole does not show any signs of having a nut or something mounted to it. Without removing the brace, I can't tell if there is a threaded hole in the bottom of the brace for the screw to go into. If so, maybe one I found is not the correct one and to short.There is about 1/2" space from the hole to the brace. Thanks dm