Does the 3.8inch wheels from the 4s line fit the 6s tires? I need to replace a stripped backflip wheel. Arrma doesn't sell wheels seperate for the 6s line
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yes they fit as far as I knowDoes the 3.8inch wheels from the 4s line fit the 6s tires? I need to replace a stripped backflip wheel. Arrma doesn't sell wheels seperate for the 6s line
You could always get the M2C kit they just came out withDoes the 3.8inch wheels from the 4s line fit the 6s tires? I need to replace a stripped backflip wheel. Arrma doesn't sell wheels seperate for the 6s line
They are a waste of money if you ask me. Its all 4 or none. From what i saw the hex might be thicker and It will push the wheel further out Than the others. I never had a problem with the 6s wheels only the outcasts onesYou could always get the M2C kit they just came out with
https://m2cracing.net/arrma-notorious-v5-exb/686-m2c-3505-universal-6-lug-hex-adapter-kit.html
Actually they aren't, they are slightly different, doubtful that it makes much of a difference though. Also the LP wheels are not vented.Yeah, the Backflip LP and 6S Backflips are the same wheel, just different profile tires.
They have these..Actually they aren't, they are slightly different, doubtful that it makes much of a difference though. Also the LP wheels are not vented.
View attachment 167293
View attachment 167294
I really wish Arrma would sell the 6s wheels and tires separate, I need new tires the wheels are just fine.
In fact my wheels Are minikawas lps for the 4sActually they aren't, they are slightly different, doubtful that it makes much of a difference though. Also the LP wheels are not vented.
View attachment 167293
View attachment 167294
I really wish Arrma would sell the 6s wheels and tires separate, I need new tires the wheels are just fine.
U got a fluke mine were vented lolActually they aren't, they are slightly different, doubtful that it makes much of a difference though. Also the LP wheels are not vented.
View attachment 167293
View attachment 167294
I really wish Arrma would sell the 6s wheels and tires separate, I need new tires the wheels are just fine.
Well what a poop show arrma. They sold in the pass the rims/tires and foam seperatly now they sell everyone in 1 package and it sucks. The farm broke like cake or was it already ripped idk. This is unacceptable. I knew the 6s foams were trash compared to the black foam used on the 4s line because after 2 years on my lps the Tire still feels stiff vs my 6s who feels like theres no foam at all specially my copperhead 2 they are flat tired my servo cant turn them on the ground still. Is there a remplacement foam of better quality i can buy?
In fact my wheels Are minikawas lps for the 4s
U got a fluke mine were vented lol
Actually they aren't, they are slightly different, doubtful that it makes much of a difference though. Also the LP wheels are not vented.
View attachment 167293
View attachment 167294
I really wish Arrma would sell the 6s wheels and tires separate, I need new tires the wheels are just fine.
The hex also is at a different alignment with the little recesses in the wheels, the 4s wheels actually look like they would hold up better.At some point they stopped manufacturing the backflip LP's with vented wheels and vented the tire instead. I have older LP's wheels with vents and newer ones without vents.
I wonder if the difference is from when they stopped manufacturing LP's with vents in the wheels? Granted, at that point you'd think they'd switch over the 6S backflip wheels with the 4S wheels so that they don't need to make two different wheels. I'll take a look at my older LP's tomorrow with wheel vents and see if they look like the 6S ones. (If I remember to).
Is the main difference just the circle marks which I assume is how they are molded? My eyes are too tired to see anything else lol (besides vents).
The hex also is at a different alignment with the little recesses in the wheels, the 4s wheels actually look like they would hold up better.
Does the 3.8inch wheels from the 4s line fit the 6s tires? I need to replace a stripped backflip wheel. Arrma doesn't sell wheels seperate for the 6s line
They don't fitGuess it isn't a manufacture date thing. On the left are the vented wheels and on the right the newer non-vented wheels. They are exactly the same otherwise. I cannot imagine why they make 2 different wheels for 4S and 6S tires. They seem identical. I doubt it would make any difference.
View attachment 167358
You can always try this method from @jkflow
https://www.arrmaforum.com/threads/talion-exb-owners-locktite-your-wheels-asap.42020/post-580133
They don't fit this loks like traxxas junkView attachment 167424View attachment 167425
They don't fit
From what i can see the 4s backflip wheels is the same thing they wont fit the 6s tires well that was awaste of timeOh, those are Copperhead 2 wheels, not the 6S Backflip wheels. Yeah, Copperhead 2 wheels are a different width, sorry, I thought you were talking about 4S and 6S backflips.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!