Clan-of-Nowina
Active Member
So, I have a problem. Front tires were very sloppy. The truck couldn’t go more that 20 or so yards on a hard surface without flipping. Decided to take it apart and have a look. No real issues with the tires, so what now. Made the decision to try install the steel ball joints into the turnbuckle arms to start. Went easy enough. Pliers were used to press out the old and install the new. No modification needed. Went right in. Reassembled it. Noticed if one tire is straight, the other isn’t. Time to do an alignment. Interesting learning curve there, but managed to get it much better than it was. Happy with what I did, but know I want it better than it is. Advise as to the next move would be appreciated.