Granite How to put screw caps on granite

[Zoomfast23]

Hi, forum I have a question does anyone have a way of put the proline screw caps mounts on the arrma granite? I've searched YouTube but to no avail of a clear view in the video on how to do it? Any suggestions would be greatly appreciated thanks
Oh and the body I'm using is the proline unbreakable body for 1/10 scale.

 

[slick2500]

Easiest way to do it is to Dremel off the nub on the body post, then drill a hole to thread the grub screw into.

Sort of like this.

 

[GRC]

 

[slick2500]

Not trying to critique but 16 minutes to show how to add Proline thumb washers? I could make a video that is less than 4 minutes showing how to do this.

 

[Zoomfast23]

Easiest way to do it is to Dremel off the nub on the body post, then drill a hole to thread the grub screw into.

Sort of like this.

View attachment 150292

Ok are those body post easier to do it?or will it work with the original body post?

 

[slick2500]

Ok are those body post easier to do it?or will it work with the original body post?

No those are the body posts off my Outcast 6s. You can do it to the original body posts or pretty much any body post that is thick enough to support a M4 grub screw. I have used these before instead of the actual Proline ones they are okay. https://www.ebay.com/sch/Cars-Truck...kw=&_armrs=1&_ipg=&_from=&_ssn=perrys3dprints pick up some of those and a pack of M4x18mm grub screws.

This guy has 2 different styles https://www.ebay.com/sch/Cars-Truck...kw=&_armrs=1&_ipg=&_from=&_ssn=perrys3dprints