Max Attitude
Active Member
- Messages
- 205
- Reaction score
- 180
Hey guys, after searching and realizing there was no aftermarket bumpers for the 4S line I decided to try customizing a 6s RPM to fit. I was inspired by another thread where someone took a rear Tbone bumper and made it fit.
I drilled holes where the stock skid plate bolts down and put this one over top of that. I jammed a piece of foam between the 2 in front to help soften some impacts and hopefully keep the screws from pulling out. I used longer screws as well.
Here are the pics of how I bolted it on. Hopefully it holds up!
I drilled holes where the stock skid plate bolts down and put this one over top of that. I jammed a piece of foam between the 2 in front to help soften some impacts and hopefully keep the screws from pulling out. I used longer screws as well.
Here are the pics of how I bolted it on. Hopefully it holds up!