Maximal112
Member
- Messages
- 9
- Reaction score
- 4
- Arrma RC's
- Kraton EXB
Hi everyone
Going to be picking up a Kraton exb soon, first car back after about 10 years. Just trying to work out what electronics to get and have been going through build threads for ideas and have settled on the below so far with what I can find near me. Will mainly be used for runs around dirt and grass, some small jumps etc to start with. Any advice or suggestions is appreciated. Servo is the main part I'm a little lost on in what's actually required.
Hobbywing EzRun Max6 4985SL 1650Kv Brushless 160A Motor and ESC Combo
Savox SB2295SG 40kg 7.4v Digital Metal Geared Brushless Servo - Will this fit? have read mixed opinions on Savox fitting
gensacearespammers Pro Bashing Series 22.2v 6800mAh 120C LiPo Battery w/ EC5 Plug
Futaba R214GRE S-FHSS 2.4Ghz 4ch Receiver - I have an old Futaba 4PL which I was planning on using
ARRMA Steel 18T 1Mod Pinion Gear - is this a good starting point for general use?
Servo saver - Does the kit come with one, do I need to purchase one?
Will be looking into getting motor fans down the track, but heading into winter here in Australia figured it was unlikely to overheat for now.
Are there any other things I may have missed to get up and running? Anything that needs to be done out of the box? I see people mentioning shimming the diffs, others mention just topping up or replacing the oil in them, is there a recommended one?
Any help is greatly appreciated.
Thank you
Going to be picking up a Kraton exb soon, first car back after about 10 years. Just trying to work out what electronics to get and have been going through build threads for ideas and have settled on the below so far with what I can find near me. Will mainly be used for runs around dirt and grass, some small jumps etc to start with. Any advice or suggestions is appreciated. Servo is the main part I'm a little lost on in what's actually required.
Hobbywing EzRun Max6 4985SL 1650Kv Brushless 160A Motor and ESC Combo
Savox SB2295SG 40kg 7.4v Digital Metal Geared Brushless Servo - Will this fit? have read mixed opinions on Savox fitting
gensacearespammers Pro Bashing Series 22.2v 6800mAh 120C LiPo Battery w/ EC5 Plug
Futaba R214GRE S-FHSS 2.4Ghz 4ch Receiver - I have an old Futaba 4PL which I was planning on using
ARRMA Steel 18T 1Mod Pinion Gear - is this a good starting point for general use?
Servo saver - Does the kit come with one, do I need to purchase one?
Will be looking into getting motor fans down the track, but heading into winter here in Australia figured it was unlikely to overheat for now.
Are there any other things I may have missed to get up and running? Anything that needs to be done out of the box? I see people mentioning shimming the diffs, others mention just topping up or replacing the oil in them, is there a recommended one?
Any help is greatly appreciated.
Thank you