Perfect Pass chassis pure pleasure and the configurations are limitless

[Boggs3010]

Although I went stock for now with a few minor adjustments. Will swap motor and ESC eventually and motor mount very soon. No fitment issues as half of the stock holes are missing such as battery trays esc holes and front and rear brace holes. Battery strap holes are in place and or double sided tape is what Raz uses. Chassis feels very sturdy ( braces not needed) and the layers appear to be flawless. The chassis did arrive with a few scratches unfortunately. I had already a PP center brace and splitter and used those in this build. Future changes coming. Any constructive criticism or ideas please share.

 

[Matt05]

I’ve had my eye on one of those for a while.

 

[RCSid]

Looks great.
Just placed my order. can't wait to start my new build.

 

[LibertyMKiii]

Now you need some prettier components to go in there like a Scorched motor mount, driveshafts, a TP Power motor, and XLX2 esc

 

[Boggs3010]

Now you need some prettier components to go in there like a Scorched motor mount, driveshafts, a TP Power motor, and XLX2 esc

Looking better, PP driveshafts and servo. Hobbywing max 6 and more parts in route. ( maxed out for a month or 2 on the rc budget)

 

[Boggs3010]

A few up grades . Carbon towers / rear aluminum suspension mounts / PP arms all around / center diff aluminum top /Aluminum Rear Hubs Stub Axle Carriers

Everything was a breeze to mount except rear hubs had to grind the sides a few thousandths. The PP arms are snug. Stock being plastic were ok to push slightly force in place.

Should add this to the build section?

 

[RCSid]

Looks great.

How did you manage the PP Center Drive Shafts with the Arrma Center Diff cups?

 

[Boggs3010]

They are version 1 and still use OEM parts. @RCSid
Next up some new hardware. Screws etc...keep me busy and cheap.

 

[Boggs3010]

Titanium screws, more coming to complete the look. Just the flat heads are titanium, the rest are painted gloss black. ( Save $$ tbh) they add what 2 or 3 mph? Next up is a motor that will be months away. No hurry as it is still winter.
Never realized how bad my old hardware looked until I took a picture with the flash on.

Almost forgot these, never saw anyone use these before.

 

[Boggs3010]

Some more little touches. Finished the screws minus the 4 (no pic) for the rear diff. They were out of the 12mm. Aluminum front/ rear body mounts.
With the push down body mounts , no more clips!!! Ordered 3 more sets.

 

[Boggs3010]

Some easier mods, clear wrap on top/bottom with a hoonigan sticker or 2.