I'm unable to get the gps sensor working together with the castle telemetry link on my Futaba 7PXR
i have 3 sensor connected to the SBus port on the Futaba receiver through a 3port adapter.
* gps sensor
* temp sensor
* auxilary wire from the telemetry link
If i put the gps sensor and temp sensor in the adapter without the aux wire, i get correct reading on my receiver from both sensors.
If i add the aux wire to the adapter, i get false readings from the telemetry link on the receiver.
And somehow the temp sensor and aux wire do work together with correct readings without gps sensor.
With al three connecters plugged in on startup the light is red on my gps sensor and i have correct readings and then when the gps sensor goes searching for position (green light blinking), thats when the telemetry link goes coo-coo.
Any ideas on what is causing this problem?
Thx.
i have 3 sensor connected to the SBus port on the Futaba receiver through a 3port adapter.
* gps sensor
* temp sensor
* auxilary wire from the telemetry link
If i put the gps sensor and temp sensor in the adapter without the aux wire, i get correct reading on my receiver from both sensors.
If i add the aux wire to the adapter, i get false readings from the telemetry link on the receiver.
And somehow the temp sensor and aux wire do work together with correct readings without gps sensor.
With al three connecters plugged in on startup the light is red on my gps sensor and i have correct readings and then when the gps sensor goes searching for position (green light blinking), thats when the telemetry link goes coo-coo.
Any ideas on what is causing this problem?
Thx.