Senton 3s motor washer.. the bent one ..

[jedibabaob]

Hi All, lost the bendy washer when my motor screws came out and I popped the cap

Trying to find the part no or dimensions if anyone can advise please

Thanks

 

[AverageWhiteGuy]

Hi All, lost the bendy washer when my motor screws came out and I popped the cap

Trying to find the part no or dimensions if anyone can advise please

Thanks

Are you referring to the E-clip.. ? Or the black washers?

 

[jedibabaob]

Apologies, should’ve been more specific , it’s the bent washer inside the motor (that goes in behind the bearing, under the spacer)

Thanks

 

[Exc3l]

Oh, how can really buy that anywhere? Also, it's not normally bent but it's so thin when you pull it out the magnets bend it.

 

[AverageWhiteGuy]

Those are called spring or *compression wave washers. Surprised to see they put a metal bushing in there. It's about 0.40 mm thick, 9.89mm OD (probably 10mm when flat), 5.45 mm ID, motor shaft is 5mm thick, ~1.6mm bent. Bearing looks like STT 695ZZ, interesting.

You could try at lowes it seems.. ??

https://www.lowes.com/pd/Hillman-10-Count-5-mm-Metric-Split-Lock-Washers/3012820

Only thing is the one inside is a heavily black anodized carbon steel washer, the ones I see are stainless steel. Not entirely sure if it matters or not.