Servo alternative for Arrma Notorious 6s

[fabiankrieger]

Hi everybody,

What do you think of this Servo, is it okay to try out? Or do you recommend something else?

https://hobbyking.com/nl_nl/power-hd-lw-20mg-servo.html

It says something about 6.6V, but the stock ESC gives 6.0V right? Is it compatible?


Thank you for your input! (L)

 

[nino]

You can use any servo on 6V. This one will be 10ish percent weaker and slower on 6V than the rated specs at 6.6...

You could get a JX servo of similar specs for half the price on ebay/aliexpress/banggood if you're not in a hurry.

 

[Typhon6smax]

I like my JX servo. It's the brushless 32kg version. They work pretty good.
https://m.nl.aliexpress.com/item/40...edetail&spm=a2g0s.12269583.0.0.7fde8ca7KKkUXX

 

[fabiankrieger]

Thanks for the info both of you! I just bought the one I talked about at a local hobby shop.

Will be installing it oneof these days. I’m curious how it performs

 

[slick2500]

It is a bit on the slow side of things at 0.16 seconds. PowerHD was the go to before Jx and Ds Servo came around, they are probably from the same OEM anyway if that matters.