Bigtim29
Active Member
No matter what, my from and rear ring gears keep stripping and shredding. There is no more room for external shims on the diffs. I just bought shims for my input gear so they now have little to no play. Could an input gear without shins be the cause of my stripped ring gears? Running ear plugs in center diff because my 500k fluid always leaked out of my center diff through the out drive and bearing opposite of the spur gear.
Forgot to mention, I now have new ring and input gears .
Here is the part number for my input gear shim
Was able to fit two input shims up front and 3 in the rear.
Put 4 tekno shims up front on ring gear side and 2 of the stock external shims in the rear, can’t fit anything else.
Forgot to mention, I now have new ring and input gears .
Here is the part number for my input gear shim
KYO96773
Part number for external diff shimTKR1222
Was able to fit two input shims up front and 3 in the rear.
Put 4 tekno shims up front on ring gear side and 2 of the stock external shims in the rear, can’t fit anything else.