Stubaxle mod

[TpPartsRcXtreme]

So far 3 broken..the outer the diamater are 10mm, so i found some old TC shocks and cut them to right length. Fits like a glove..so far 6s bashing on tarmac and sand zeeo problem.

 

[griff7373]

Same thing I had to do to my RC18MT a few years back, worked like a champ

 

[Unusual RC]

Do I understand it correctly? 1/10 scale 2WD Arrma on 6S?

 

[TpPartsRcXtreme]

@Unusual RC yes you understant right my friend. I allways want to take every single model (bashing) i won to it limits..and i must say..i am stuned about how well it handles this massive amount of power

 

[WoodiE]

@Thomas P this is certainly worth a post like, thanks for sharing.

 

[Darren Wes]

Same thing I had to do to my RC18MT a few years back, worked like a champ

I know this is off topic but griff im working on an 18mt too i got the 52kv brushless 60amp esc rpm parts im on 60/14 gearing gpm shocks did the dogbone covers and it works well, but i cant keep it straight!
I did the 65mg servo with the correct servosaver w/ spring mod metal steering block.... and have switched back and forth between the stock turnbuckels and steel, but i still cant seem to get it to hold straight.... is there some trick im missing, or is it because its an 1/18 that makes it not as stable as far as turning is concerened...

So far 3 broken..the outer the diamater are 10mm, so i found some old TC shocks and cut them to right length. Fits like a glove..so far 6s bashing on tarmac and sand zeeo problem.

Thats a neat idea, but doesn't that only help with the dogbones flying out? Not sure how it helps from bending/breaking

 

[Darren Wes]

I will say that those axels freakin' bend quick even with the stock motor there was powerloss from them bending in the first month

 

[TpPartsRcXtreme]

When the rear suspension are fully compress the dogbone starts to stress the subaxle. My 3 failure was them splitting ing half...this prevents them from "opening" i have zero probl3ms since th3 mod..even on 6s

 

[griff7373]

Sorry for the late reply give me a chance this weekend and I will pull mine down and take some photos. Mine is probably not as fast as yours I am running a reedy brushed motor in mine.

 

[TpPartsRcXtreme]

Please do mate

 

[BigSplit]

You are everywhere Thomas...Lol, I'm the guy who asked if you were the man behind the 6s build in the FB group recently

 

[TpPartsRcXtreme]

Yepp, that sounds like me..i do remember