Kraton Subtrim, travel setup DX5C

[MrTJox1]

I'm getting ready for tomorrow and setting up my steering. When I center my servo, the right wheel seems cocked to the right. The turnbuckles are both 68 mm and my sub trim is set to 0. When I adjust the on the fly steering to -34 (or higher) it straightens out. Is that normal, ok, or hiding a problem with the setup?

 

[Brandon]

Remove the servo horn, adjust your wheels, turn on the car your servo should center, then reattach the servo horn. Should straighten it out.

 

[MrTJox1]

Remove the servo horn, adjust your wheels, turn on the car your servo should center, then reattach the servo horn. Should straighten it out.

I'm an advanced newbie... thanks

 

[jondilly1974]

The toe out is normal and helps the truck turn better. If you’re not running on a track or don’t need to turn on a dime, take the toe back to neutral.

 

[MrTJox1]

The toe out is normal and helps the truck turn better. If you’re not running on a track or don’t need to turn on a dime, take the toe back to neutral.

I set it to the 68 mm, factory setting.