Installed since first of Jan 2024 ....
Hobbywing XR-8 Plus G2 200a ESC
Hobbywing Xerun 2250 KV G2 ( Running Full Sensored )
Skyfly GR-3C 2.4 radio
Power Hobby 729 MBL Servo W/new linkage.
40mm Rocket fan on motor
XB steering ends & balls
Custom center brace on an HR rear ( senton ) mount
Nylon sleeves over the center & diff drive cups
Having been using a Very Nice FUTABA 3PK in crystal mode, Purchasing the 2.4 gig TX module and Matched receiver was going to set me back @ $180 so rather that do that I spent $58 and purchased a Skyfly GR-3C system. Hopefully I won't miss the 3PK too badly.
After trying to run my Toro XR-8 Pro 2250 in sensored mode with No luck, it prompted the purchase of a new motor even tho it was not needed to continue running ... o'well.
As too the mods and parts added over the years the Buggy just keeps going with only minimal breakage .. it's one tough rig no doubt !!!
Hobbywing XR-8 Plus G2 200a ESC
Hobbywing Xerun 2250 KV G2 ( Running Full Sensored )
Skyfly GR-3C 2.4 radio
Power Hobby 729 MBL Servo W/new linkage.
40mm Rocket fan on motor
XB steering ends & balls
Custom center brace on an HR rear ( senton ) mount
Nylon sleeves over the center & diff drive cups
Having been using a Very Nice FUTABA 3PK in crystal mode, Purchasing the 2.4 gig TX module and Matched receiver was going to set me back @ $180 so rather that do that I spent $58 and purchased a Skyfly GR-3C system. Hopefully I won't miss the 3PK too badly.
After trying to run my Toro XR-8 Pro 2250 in sensored mode with No luck, it prompted the purchase of a new motor even tho it was not needed to continue running ... o'well.
As too the mods and parts added over the years the Buggy just keeps going with only minimal breakage .. it's one tough rig no doubt !!!
Last edited:
