what's arrma going to do about the Big Rock motor and motor mount problem?

[Bruce banner]

Can anyone tel me?
And with Problem I mean this......... Twice in 3 weeks??and it seems to be a known Problem, so they tell me earlier this week here on the forum?!

 

[SrC]

Got me. anyone else?

 

[JvG]

Fully agree they should fix this! I even sold my BRCC for this, there were no adjustable motormounts available at that time.

 

[jondilly1974]

Adjustable motor mount and a steel spur will fix that for good.

 

[crimsonfancy]

No issue at all with my brcc. The mesh is way too tight from the get go and I drove it pretty hard. After about 5 weeks I put on the Hot Racing and 18t. No trouble before or after.

 

[arrmadillo]

Does anyone with the Granite blx have the same issue?

 

[Bruce banner]

Adjustable motor mount and a steel spur will fix that for good.

I know that..... But arrma did built the BRCC wrong so that this would happen anyway, so when you ask for my opinion I would say that arrma has to pay... In ohter words, arrma should fix this....... But that's how I'm thinkin about it ?

Does anyone with the Granite blx have the same issue?

You have this Problem with your Granite blx?

 

[arrmadillo]

I know that..... But arrma did built the BRCC wrong so that this would happen anyway, so when you ask for my opinion I would say that arrma has to pay... In ohter words, arrma should fix this....... But that's how I'm thinkin about it ?

You have this Problem with your Granite blx?

No, not yet, but wonder if others have.

 

[Bruce banner]

Ok??I hope you never have to face this Problem! ????
Because the dealer doesn't really know what to do whit this problem(thing)

 

[jondilly1974]

I had this issue with my Granite BLX and my Typhon 3S

 

[Bruce banner]

I had this issue with my Granite BLX and my Typhon 3S

IT seems to me arrma is doing nothing about it?

 

[jondilly1974]

IT seems to me arrma is doing nothing about it?

Sure they are. They offer to sell you a steel spur and adjustable motor mount. ??‍

 

[Bruce banner]

Sure they are. They offer to sell you a steel spur and adjustable motor mount. ??‍

I know.... But that was not my idea of Guarantee, you know?

 

[bicketybam]

Use a drill to widen up the mounting holes so you can set the mesh a little looser. Steel spur not required.

 

[Philippevibe]

Is important to have a fuse part in RC brushless this blx motor have lot power and drill size up for more d’ajustement and the key in RC is maintenance

 

[Kylepeefect659]

Can anyone tel me?
And with Problem I mean this......... Twice in 3 weeks??and it seems to be a known Problem, so they tell me earlier this week here on the forum?!
View attachment 45639View attachment 45640

I've done the same 4 times in the span of 2 weeks I have not fixed it yet either going on 3 weeks no rc

 

[BLX Matt]

Add these 2 to list stock 15t pinion hound to a knifes edge and 3rd spur gear ovaled on stock motor mount
I believe it’s the spur bearings get loose and then the play turns into broken parts

 

[t_MoneyCR250]

Use a drill to widen up the mounting holes so you can set the mesh a little looser. Steel spur not required.

Yep, just went through this Horizon sent new motor, spur, and bearings. I used a 9/64 drill bit and mesh is perfect now IMO.

 

[Mk_Rc]

No i didnt have this problem...

 

[Bruce banner]

I have widen up the holes a Little in the motor mount .....steel spurgear ?? and finaly the Big Rock drives like he should do.....thanks For the tips guys!??