Reaper 007
Fairly New Member
- Messages
- 27
- Reaction score
- 3
- Arrma RC's
I need help..what's the proper procedure for setting the droop screws..I keep tearing out shock rod ends..
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
^ I do that but I adjust to the end of shock travel. undo the shock, let the arm hang down, adjust droop screw until you can slide the shock pin in/out smoothly without compressing/extending shock.
adjusting to slightly having to compress the shock in is the safer way. gives you a little bit of leeway if there's some wear on the droop screw/chassis.
^you're right about that. I'll be readjusting my droop screws
do you run stock arms or rpm? I used to run rpm but they tend to sag bad after a while. the stockers keep their shape a bit better and i have yet to brake one
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!