servo

I have stripped the gears in the stock ADS-5 servo and was curious if the ADS-7 would a direct swap into the mega 4x4. From what I’ve read they have all the same specs, dimensions/connector/spline.

Title says it all. Are the metal internal gears on the ads7m compatible with the ads-5. The plastic gears on the ads-5 stripped on my kids truck. I did a little looking for the plastic gears but everywhere was out of stock. One of the places I found had the ads-7 metal gears available. They...

hello hobbiest i was wondering if the blx servo would be the same size maybe better the problem I have been reading about them not working quickly thanks

Need some help on replacing the servo on a Senton Mega 4x4. Doesn’t seem easy to me (my first rc repair I’m a newbie lol) Do I need to take off the whole bottom chassis off to get the servo saver back attached to the linkage, etc. Are there any servo replacement videos of this truck? All video...

I replaced my stock tali on Servo with the savox 0231 and the steering is reversed in it. Do I need to do anything other than flip the switch on the back of the receiver? Does the horn need to be off? Does the end points need to be reset as well? Thanks

I got the new Granite 4x4 about two weeks ago. Took it out for the first run and clipped (Barely) a step. The wheels became locked to the left because the tiny plastic splines in the horn and the tiny plastic splines on the servo slipped and repositioned the center. I took it apart and...

Hi. I'm new owner of Outcast its great beast but , this servo is a joke. Have him 3 days , and use : First day 1x4s battery 1 time Second day 2x3s battery 1 time Third day 2x3s battery 1 time Its maybe 2h fun and servo totaly broken , center gear don't have tooth. Disapointed new Owner.

Looking for a new servo. Mine just went out. I’m new to R/C about a month, and don’t know what to look for. Any suggestions? Is this a decent one?

Hi there! I just want to ask for tips regarding servo replacement for my granite mega 2wd with brushed motor. I'm planning to have my stock servo replaced with Savox 1210SG Servo. Aside from the servo itself, what other parts must I consider to replace for compatibility with other stock parts...

Something odd happened with the steering servo on my Raider, after driving a solid 30 minutes the steering started being 'delayed' to react to my input and after 5-10 seconds of that it would stop moving at all. I noticed the chassis plate under the servo was very warm, almost hot. I'm thinking...

I have a kraton and Im tired of buying new expensive servos that don't last but a couple of weeks before giving out. Im to the point now that i am just going to buy a bunch of cheep ones and just keep replacing them. I have spent nearly 300 dollars on servos over the last yr and have not found a...

I got the arrma Nero about a month ago and I had to replace my servo but other than that it has been good until recently I sent the esc to arrma because full throttle wasn't working and it would not turn right they sent it back and now the throttle does not work and it still doesn't turn right...

Just bought a granite mega on Sunday. Steering servo is already stripped out. What is a decent upgrade that won't break my bank account? Probably a question that has already been answered but I'm new here so cut me some slack.

Can some of you tel me if the difflock servos (ADS-08) (AR390103) are HighVoltage?

Hi All, I`m new here and am very much a novice. I`ve got an almost new standard Nero and not long after I got it the steering servo burned up (no known reason it just stopped steering?). Armma "fixed" it but the truck won`t steer well at all when in motion. With no weight on the wheels it works...

I still don’t have a grasp on what the the adjustments are on the TX. Whats the difference between adjusting the endpoints from the buttons vs. the dial? I just don’t get it.

I thought the original servo is not bad. But now I went for the SAVÖX SB-2292 SG. The Big Rock totally changed. It turns on a dime! Awesome drifts with the torque and the quick response Torque: @6V: 305 oz-in (22 kg-cm) @7.4V: 430 oz-in (31 kg-cm) Speed: @6V: 0.085/60° s @7.4V: 0.07/60° s

I thought the original servo was ok, but now I picked up the Savöx SB-2292 SG. I wanted to improve torque and speed. This servo has both (see below). But effect on the drivability is extreme. It turns like it has a connection to the brain ;) Nice drifts at full speed without loosing control...

I thought the original servo is not bad. But now I went for the SAVÖX SB-2292 SG. The Big Rock totally changed. It turns on a dime! Awesome drifts with the torque and the quick response Torque: @6V: 305 oz-in (22 kg-cm) @7.4V: 430 oz-in (31 kg-cm) Speed: @6V: 0.085/60° s @7.4V: 0.07/60° s

hey guys, I just wanted some advice on how tight the servo saver should be for my kraton, I blew out 2 stock servos and a savox 1211sg. Could it be my servo saver was to loose?