☆Tools you cant do without/ use every time??? GO!!!☆

[mr_nom_noms_]

What tools do you use every time you work on your rc cars? What tools can't you live without?

Share because we're nosy as f@*k

1) Magnet picker upperer
2) torch
3) Dremel
4) head lamp

 

[olds97_lss]

Milwaukee M12 driver with clutch.
MIP M2 M2.5 M3 bits.

If it weren't for those... I wouldn't be in this hobby because my hands won't hold onto a wrench well enough anymore to do any fixing.

 

[morrjr71]

I rarely use a Dremel or magnetic pickup tool, but I almost always use a LED headband light. Occasionally I'll use a hand held LED flashlight (torch), but generally only when I'm checking something out, not when I'm actually working on something and I need both hands free. High quality 1.5mm, 2.0mm, and 2.5mm hex drivers are absolute must-haves, especially the 2.0.

 

[olds97_lss]

I rarely use a Dremel or magnetic pickup tool, but I almost always use a LED headband light. Occasionally I'll use a hand held LED flashlight (torch), but generally only when I'm checking something out, not when I'm actually working on something and I need both hands free. High quality 1.5mm, 2.0mm, and 2.5mm hex drivers are absolute must-haves, especially the 2.0.

I have a 150W equivalent LED above my head in one of those old school work light clip on things and another 60W LED light bar on my work bench. I have another 150W equivalent LED in one of those extending desk lamps at my workbench as well so I can swing it over my vice. It's like the sun is in my office when I have both of those things on... lol!

 

[Dutch]

These are 2 of favs, I carry them almost everywhere

 

[Liquid SSSnake]

6" calipers, all the time it seems

Shim thicknesses, bolt lengths, which sway bar is which, drill bits, pins, and etc....

 

[Edough13]

My MIP's 2.0, 2.5, T wrench big and small size, needle nose pliers and a flat head is what I use on just about every rig I have.

 

[CameronCodes]

These are 2 of favs, I carry them almost everywhere
View attachment 140147

....that's 3 things.... right?