MikeyRitz1
Member
- Messages
- 32
- Reaction score
- 33
Hello,
I am wanting to upgrade my Esc and motor on my vendetta once I try a couple more runs. I am just so confused as to what to go for. First let me show my current mods to help you better understand what I am trying to do.
Mods:
44T Spur/ slipper eliminated Mod08
32T Pinion - mod08
RCAWD F/R Control Arms
Custom Titanium F/R Tierods
RCAWD Metal Axles
RCAWD Big Bore Alloy Shocks
RCAWD Metal Hubs F/R
Carbon Fiber Center Chassis Brace
Coda Racing Center Bearing
Fast Eddys Ceramic Bearings Throughout
Hot Racing Alloy Driveshaft
Arrma 4s Metal Diff upgrade Boost box
Aluminum Yokes on both diffs
Spektrum Bluetooth module for DX3
Carbon Fiber Front splitter
Carbon fiber side skirts
Carbon Fiber Rear Winglets
Carbon Fiber rear Bat wing w/one-runner for less downforce for speed running….
CNHL 6200mah 100c 3s Batteries
The next upgrade is tires and I may go w/pro line vectors but I found out they have a rating of 80mph and I am trying and have well exceeded 80mph. So Dboots 2.4 Silvers may get ordered this week. My best speedrun to date was 97mph, and The car has been down since that run for two reasons. The stock servo crapped out on me and all steering was gone during the run. Thankfully I was able to stop the car safely. The second thing was as I was at peak, the front left tire made a horrible Bang and separated from the rim. The car has been on about 10-11 actual full on runs with the throttle pinned for a good while. I’ve been fortunate not to have any bad crashes…yet.
I am so torn with either staying with soektrum and throwing in a 150 or 160amp esc. Or should I go with hobbywing and get a 6s-8s system then upgrade the motor also. My goal for the car, is the moon. What motor and esc combo would you buy in my position? I only do speedruns.
Main reason also other than going as fast as possible is, The 100amp esc hits low voltage cut. SO OFTEN due to my gearing and heat is becoming a factor as one full run brings the temps to 200-220 degrees. Then hits heat cut also.
Any help and suggestions would be appreciated. Thank you!
I am wanting to upgrade my Esc and motor on my vendetta once I try a couple more runs. I am just so confused as to what to go for. First let me show my current mods to help you better understand what I am trying to do.
Mods:
44T Spur/ slipper eliminated Mod08
32T Pinion - mod08
RCAWD F/R Control Arms
Custom Titanium F/R Tierods
RCAWD Metal Axles
RCAWD Big Bore Alloy Shocks
RCAWD Metal Hubs F/R
Carbon Fiber Center Chassis Brace
Coda Racing Center Bearing
Fast Eddys Ceramic Bearings Throughout
Hot Racing Alloy Driveshaft
Arrma 4s Metal Diff upgrade Boost box
Aluminum Yokes on both diffs
Spektrum Bluetooth module for DX3
Carbon Fiber Front splitter
Carbon fiber side skirts
Carbon Fiber Rear Winglets
Carbon Fiber rear Bat wing w/one-runner for less downforce for speed running….
CNHL 6200mah 100c 3s Batteries
The next upgrade is tires and I may go w/pro line vectors but I found out they have a rating of 80mph and I am trying and have well exceeded 80mph. So Dboots 2.4 Silvers may get ordered this week. My best speedrun to date was 97mph, and The car has been down since that run for two reasons. The stock servo crapped out on me and all steering was gone during the run. Thankfully I was able to stop the car safely. The second thing was as I was at peak, the front left tire made a horrible Bang and separated from the rim. The car has been on about 10-11 actual full on runs with the throttle pinned for a good while. I’ve been fortunate not to have any bad crashes…yet.
I am so torn with either staying with soektrum and throwing in a 150 or 160amp esc. Or should I go with hobbywing and get a 6s-8s system then upgrade the motor also. My goal for the car, is the moon. What motor and esc combo would you buy in my position? I only do speedruns.
Main reason also other than going as fast as possible is, The 100amp esc hits low voltage cut. SO OFTEN due to my gearing and heat is becoming a factor as one full run brings the temps to 200-220 degrees. Then hits heat cut also.
Any help and suggestions would be appreciated. Thank you!