Ok, I got a new body and I don’t want to put holes in the body. Looking for a good magnet system for the infraction. Right now I’m using Velcro but I’m not happy with it.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ok, I got a new body and I don’t want to put holes in the body. Looking for a good magnet system for the infraction. Right now I’m using Velcro but I’m not happy with it. View attachment 244402
Ok, I got a new body and I don’t want to put holes in the body. Looking for a good magnet system for the infraction. Right now I’m using Velcro but I’m not happy with it. View attachment 244402
Man you have a good man there @Tex Koder does some good work! Love to see what he comes up with.
I only have one concern since I have an Infraction and had a Felony I sold. I have seen many videos where Infraction and Felony can get airborne. Keep that in mind that might not be an issue the magnets could be strong enough to hold the body under power but these little cars can get some air draft under them. Maybe think of a latch or catch on the front/rear or something as a safety backup.
have not seen this setup on a basher or speed runner whichever you do very excited to see the project whatever Tex comes up with, I want one as well
Yes, it was for me! he did an excellent job!! He’s done a couple for me!Hey hold on a sec..
Isn't this Ajag's paint job he showcased a couple of days ago??
I can draft up something unique and magnetic for it..
Let me know if the body posts are around the same height as stock heights. (Or are they lower or higher than stock positions?)
Also if you can take a couple of photos of the underside of that body with a ruler ,near about's where the posts are touching so I have a point of reference. That would help greatly.
Will do I will get them over to you tomorrow night. Thanks for the help!Hey hold on a sec..
Isn't this Ajag's paint job he showcased a couple of days ago??
I can draft up something unique and magnetic for it..
Let me know if the body posts are around the same height as stock heights. (Or are they lower or higher than stock positions?)
Also if you can take a couple of photos of the underside of that body with a ruler ,near about's where the posts are touching so I have a point of reference. That would help greatly.
Pretty slick! Let us know how that holds up. I might try that.Ok, I took a bunch of pictures. I lowered the front post down 2 holes the back I left factory height. View attachment 244705View attachment 244706View attachment 244707View attachment 244708View attachment 244709View attachment 244711
Ok, I took a bunch of pictures. I lowered the front post down 2 holes the back I left factory height. View attachment 244705View attachment 244706View attachment 244707View attachment 244708View attachment 244709View attachment 244711
Great. Thank you for Ute help on this.Sorry for the delay..
Been tied up on another project.
I'm going to start sketching the magnetic body mounts (NO drill-thru Body solution) this afternoon..
Will post when I get a rough draft drawn up.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!