Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yup just solder that guy back on.Yes it came off in middle of the run.
I was thinking this as well after I made my post. Those wires just don't up and fall off on their own.I’d be concerned as to why it came off.. was it ripped off? Did it get so hot it desoldered itself? Is there a loose bullet connection?
Lucky they didnt touch otherwise firebomb.. quess how i know
I usually use one Heatshrink tube over the center terminal B Tab covering that middle solder joint. Insurance against dead shorting the others adjacent to it. I don't cover the other 2.Lucky they didnt touch otherwise firebomb.. quess how i know
I tried to get my blx 150 to get out of the 5 green lights of death . I pluged the connector when i was giving slight throttle and it caught fireI usually use one Heatshrink tube over the center terminal B Tab covering that middle solder joint. Insurance against dead shorting the others adjacent to it. I don't cover the other 2.
But you can if you want.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!