Early LVC FIXED!

[bigbristv]

I was having issues with my esc cutting out early on my Mojave 4s, then on my Vendetta and Infraction 3s. I looked everywhere and then thus happened:

 

[Tex Koder]

Nice.

Thanks for giving us all a heads up.

 

[bigbristv]

NP Tex, I shot a whole video showing the step-by-step but thought the PSA would be sufficient as that's how I was helped.

 

[bigbristv]

Here is is anyway. Hope it helps someone.

 

[bigbristv]

Here are the settings for the new firmware for ones doing the beeps method:

Option
1. Running Mode -
1. Forward/Brake
2. For/Rev/Brake (default)

2. Drag Brake -
1. 0% (default)
2. 2%
3. 4%
4. 6%
5. 8%
6. 10%
7. 12%
8. 14%
9. 16%

3. Cutoff Volt -
1. 3.2V/Cell
2. 3.3V/Cell
3. 3.4V/Cell (default)
4. 3.5V/Cell
5. 3.6V/Cell
6. 3.7V/Cell

4. Punch -
1. Level 1
2. Level 2
3. Level 3
4. Level 4
5. Level 5
6. Level 6
7. Level 7
8. Level 8
9. Level 9

5. Max Brake -
1. 25%
2. 37.5%
3. 50%
4. 62.5% (default)
5. 75%
6. 87.5%
7. 100%

6. Max Reverse -
1. 25% (default)
2. 50%
3. 75%
4. 100%

7. Neutral Range -
1. 6%
2. 9% (default)
3. 12%

8. Timing -
1. 0deg
2. 3.75deg
3. 7.50deg
4. 11.25deg
5. 15deg
6. 18.75deg
7. 22.5deg (default)
8. 26.25deg

9. Motor Rotation -
1. CCW (default)
2. CW

10. BEC Voltage -
1. 6.0V (default)
2. 7.4V

11. Battery Mode -
1. Lipo
2. Nimh

It would look much better on a speadsheet...

 

[parcou]

Here are the settings for the new firmware for ones doing the beeps method:

Option
1. Running Mode -
1. Forward/Brake
2. For/Rev/Brake (default)

2. Drag Brake -
1. 0% (default)
2. 2%
3. 4%
4. 6%
5. 8%
6. 10%
7. 12%
8. 14%
9. 16%

3. Cutoff Volt -
1. 3.2V/Cell
2. 3.3V/Cell
3. 3.4V/Cell (default)
4. 3.5V/Cell
5. 3.6V/Cell
6. 3.7V/Cell

4. Punch -
1. Level 1
2. Level 2
3. Level 3
4. Level 4
5. Level 5
6. Level 6
7. Level 7
8. Level 8
9. Level 9

5. Max Brake -
1. 25%
2. 37.5%
3. 50%
4. 62.5% (default)
5. 75%
6. 87.5%
7. 100%

6. Max Reverse -
1. 25% (default)
2. 50%
3. 75%
4. 100%

7. Neutral Range -
1. 6%
2. 9% (default)
3. 12%

8. Timing -
1. 0deg
2. 3.75deg
3. 7.50deg
4. 11.25deg
5. 15deg
6. 18.75deg
7. 22.5deg (default)
8. 26.25deg

9. Motor Rotation -
1. CCW (default)
2. CW

10. BEC Voltage -
1. 6.0V (default)
2. 7.4V

11. Battery Mode -
1. Lipo
2. Nimh

It would look much better on a speadsheet...

Is there a new firmware for the older ESC or this is only for new rig? I do not have the v2 program box I still have the old one

 

[bigbristv]

Is there a new firmware for the older ESC or this is only for new rig? I do not have the v2 program box I still have the old one

This appears to be new firmware as I couldn't find a corresponding esc chart with the included settings. It worked on all of the [Spektrum] escs I have.

The V2 ESC PROGRAMMER box is necessary to update your esc (not sure if it will work with the old box) and if you had it you wouldn't need the info I posted above, the card would tell you that.

So basically, let's say I have the box, you don't. I upgrade your firmware for you and you go on your way. When you later want to adjust your punch or LVC for instance and I have dropped off the face of the earth, you can still change your esc settings using the beep method but you would need to know what the beeps correspond to. Thus the chart above.

 

[parcou]

This appears to be new firmware as I couldn't find a corresponding esc chart with the included settings. It worked on all of the [Spektrum] escs I have.

The V2 ESC PROGRAMMER box is necessary to update your esc (not sure if it will work with the old box) and if you had it you wouldn't need the info I posted above, the card would tell you that.

So basically, let's say I have the box, you don't. I upgrade your firmware for you and you go on your way. When you later want to adjust your punch or LVC for instance and I have dropped off the face of the earth, you can still change your esc settings using the beep method but you would need to know what the beeps correspond to. Thus the chart above.

You are right...

Connected the newer box with the latest programming software. I have the latest it does not give the FW you posted. So I need to order the v2 box...sucks but this is how they made it.

 

[bigbristv]

You are right...

Connected the newer box with the latest programming software. I have the latest it does not give the FW you posted. So I need to order the v2 box...sucks but this is how they made it.

I know man. I had major anxiety after I ordered the V2 box thinking now imma have to buy a laptop. Fortunately the one I bought my son for school during the pandemic worked

II think HH would have been better off sending me the programmer instead of new escs.

 

[Rixxie33]

I was having issues with my esc cutting out early on my Mojave 4s, then on my Vendetta and Infraction 3s. I looked everywhere and then thus happened:

I just down loaded my v2 box. It showes
1.0.23, is this the newest upgrade?
I can set all the settings, approximately 1 to 10!

 

[rgfast]

I just down loaded my v2 box. It showes
1.0.23, is this the newest upgrade?
I can set all the settings, approximately 1 to 10!

1.0.23 is the latest,

 

[Rixxie33]

1.0.23 is the latest,

So 1.0.23 is the new version, as you just downloaded it?? Correct?

 

[rgfast]

So 1.0.23 is the new version, as you just downloaded it?? Correct?

Correct for what it matters!!!

 

[King blitz]

I was having issues with my esc cutting out early on my Mojave 4s, then on my Vendetta and Infraction 3s. I looked everywhere and then thus happened:

Thx for sharing.. that's very helpful.i know what I'm buying next and what to do now.

 

[bigbristv]

I glad this is helping folks. Made my day