evolution
Fairly New Member
- Messages
- 24
- Reaction score
- 13
hey guys thought I post here before throwing money at the Mojave to get some ideas on what's going on.
esc powers up does not show any lights or blink codes no chime at all, receiver binds to transmitter, servo responds but no power to motor. I unplugged the motor to see if anything would change in the esc with no luck.
Before this happened I was having throttle and brake delay issues where there would be a noticeable delay when trying to brake or throttle up from a stop.
I think I know the issue but I just want to hear some other peoples opinion on this just to possibly factor anything out before dropping some money in it.
thanks
dx5 trans
sr6200a receiver
firma 150a esc / 4074 2200kv
s652 servo
esc powers up does not show any lights or blink codes no chime at all, receiver binds to transmitter, servo responds but no power to motor. I unplugged the motor to see if anything would change in the esc with no luck.
Before this happened I was having throttle and brake delay issues where there would be a noticeable delay when trying to brake or throttle up from a stop.
I think I know the issue but I just want to hear some other peoples opinion on this just to possibly factor anything out before dropping some money in it.
thanks
dx5 trans
sr6200a receiver
firma 150a esc / 4074 2200kv
s652 servo