How to get superglue out

[dillon_mitko]

I bought HR driveshafts for my BRCC after going through about 10 of the stock ones a little while ago.
I found you need to superglue/thread lock them on or they will just keep falling off so I did so with superglue as I didn’t have any thread locker that the time
I’m redoing my diffs so I had to take them off to make it easier.
All the screws took some force to come out, but they all did come out. Now that I am done with my diff I went to put them back on and the super glue seems to still be in the threads
How can I get this off?
Btw I have thread locker for this time?

 

[crimsonfancy]

Acetone is what I've always used to remove ca glue.

 

[GMballistic]

You could try @crimsonfancy suggestion or failing that you'll have to run a tap through the threads to clear them out.

 

[Senton Monster]

I was going to recomend both. I would try the Acetone and run a set screw threw it. using the tap and die set is more extreem and you could cut into the treads so be very carefull if you go the tap and die road.