- Messages
- 915
- Reaction score
- 3,688
- Arrma RC's
- BigRock 4x4
- Felony
- Infraction
- Limitless
- Kraton 8S
- Kraton 6s
- Notorious
- Outcast 8s
- Outcast 6s
- Outcast 4s
- Talion
- Typhon 6s
I’ve been building a lot of fans for people lately and there’s always questions around how to power them
Here’s what I do
I’ve been making plugs that will allow you to plug your 12v fans into any main pack configuration using the balance plug.
that’s all you need to do is to properly tap into the balance port
see pics attached
All configurations have the red wire on the end and then the black wire needs to be soldered on 3 pins later
See pics
This plug I made allows me to power my fans off a single 3s/4s or 6s
So pretty much any configuration we run these days
Here’s what I do
I’ve been making plugs that will allow you to plug your 12v fans into any main pack configuration using the balance plug.
that’s all you need to do is to properly tap into the balance port
see pics attached
All configurations have the red wire on the end and then the black wire needs to be soldered on 3 pins later
See pics
This plug I made allows me to power my fans off a single 3s/4s or 6s
So pretty much any configuration we run these days