Infraction Infraction BEC Voltage with Firma 150A - 6v or 7.4v?

[parcou]

Question

If I am running the stock servo on my Infraction v1 (Felony as well), the ESC defaults to 7.4v BEC (Firma 150A ESC is installed). I should change that to 6v, right? The steering servo is not 7.4v I am assuming from the factory?

I assume 7.4v is only helping if I have a faster servo, right?

Thx

 

[Monster Dork]

Match the BEC to your servo. Look up your servo's specs rather than taking my word for it, my memory sucks.

 

[parcou]

Match the BEC to your servo. Look up your servo's specs rather than taking my word for it, my memory sucks.

Good call....I looked at the specs for the OEM servo and it comes right to 7.2v but does not list as 7.4v. If it does not say it is 7.4v so does that mean I drop to 6v for the BEC and not to assume it does hit 7.4v although the servo list only 7.2v...???

Torque: ADS-15M: 15kg/cm (208oz/inch) at 7.2V
Speed: 0.16 sec/0.14 sec 6V/7.2V
Signal: Analogue

 

[jkflow]

Leave it at default 7.4V, perfectly ok for the stock servo.