Infraction Infraction on track

[milkdk]

Hi,

Are some of you running your Infraction on track and do you have some tips for setting up the car?
Here a video of us after 3 sessions with setting up the car. It behaves very well on the track now.

Running on stock setup it was literally undrivable around the track ?

 

[BashingBrian]

What did you have to do, to get it to handle well on the track..??

 

[milkdk]

What did you have to do, to get it to handle well on the track..??

I will post a video on this when we have the right setup.

Our biggest problem was the backend sliding out both under acceleration and braking.

We have stiffen up the backend by setting the rear suspension more "horizontal" in the inner screw hole.
Adjusted droop screws, camber and ride height.

We have ordered new swaybars and springs to see if we can tweek it a bit extra.

 

[Turbobrick]

Nice little track that and both cars seem to be doing well round it
I need to go up to the local sprint track at some point once things settle its only 800m long 3.5m wide with a few run off spots but could be a fun track to have a go on.
https://racecollective.com/race-venues/kames-circuit/

 

[jondilly1974]

I would assume the rear diff fluid might be a tad thick too

 

[Typhone6sNL]

Very cool! Looks good!

 

[Infractiondk]

What did you have to do, to get it to handle well on the track..??

We did ride hight lay Down shocks at Rear. Rear camber links in upper hole outer and lower hole inner
Droop setup Sway bar at outer position on bar and front as far in as we Could

Allso achermann plate moved backwards And with bearing in it
Srt fast servo cant Remember model
grp s3 tires
Front i have a little Spacer on top a arm to get -1 dec camber. And running -4 dec right Rear and -3 on left
Stock esc and motor with 17t pinion
30f 500 center and 50rear diff Oil

Will be going to 500 front 20mio center(or spool) and Maybe 60 Rear

punch is set to 9. And running No avc
brake is max on esc and 80% on dx5c
Wil get harder springs in front and softer Rear. Thicker front Sway bar and thinner Rear

 

[milkdk]

Btw this is @Infractiondk driving. I’m going to invest in a camera or phone stand to document this a lot more on this channel

 

[BashingBrian]

I'm running 30/500/60 in mine with Tekno/Mugen camber and steering links to remove slop.
Have a look at my build thread for some of the settings I used..??

 

[Infractiondk]

I'm running 30/500/60 in mine with Tekno/Mugen camber and steering links to remove slop.
Have a look at my build thread for some of the settings I used..??

Will be running 500 front 20m center or spool. And 50/80 Rear
Do you have a link for you build?

 

[BashingBrian]

Will be running 500 front 20m center or spool. And 50/80 Rear
Do you have a link for you build?

Sorry for the delay, here you go..???

https://www.arrmaforum.com/threads/bashingbrians-infraction-build-sort-of.14088/

 

[milkdk]

New track video. Unfortunately still no camera mount, so can't film and drive at the same time. Still only @Infractiondk driving.

Cold weather so we struggled to keep the tyres warm. Running GRP S3 in the front and GRP S2 in the rear.

 

[LFCforever]

Hi,

Are some of you running your Infraction on track and do you have some tips for setting up the car?
Here a video of us after 3 sessions with setting up the car. It behaves very well on the track now.

Running on stock setup it was literally undrivable around the track ?

Hi. Can you share your current on-track setup for the Infraction? I've just got one and have a local track I'm going to run it on. Thanks in advance