Mojave Just got a 6s Mojave and put it to the TEST!!!

[nomis38]

Beat downs are great. You will get more likes. Send them all.

Pretty sure I figured out the method to the madness. Honestly it has nothing to do with forums, technical data, or sending things to the moon. Dang shorts, or pointless look at this stuff, is all anyone cares about. In all honesty though i'm having a boatload of fun making funny shorts, It is a hoot!

Dang near every short I make gets 2k views within the first 24hours.

This is just my December......

Not really funny but these I made within the last day and honestly I forgot all about them till now. Great clips from amazing videos I made a while back that got trash for views. In a day or two they will have gone wild on views, and for good reason.


Me rippin' my 7" drone around and noticed my friend inverting her 700 heli over our landing strip.

This was one of our airshows last summer. This freaking 8 year old learned to hover a $2500 gas 4stroke plane in 5 attempts. He had never hovered before.

 

[SrC]

I was being serious.
I believe you. The data doesn't lie. Shorts are the thing these days and so much easier to make numerous ones. TikTock away. Most us have short attention spans. Shorts get to the point quickly.

 

[nomis38]

I was being serious.
I believe you. The data doesn't lie. Shorts are the thing these days and so much easier to make numerous ones. TikTock away. Most us have short attention spans. Shorts get to the point quickly.

No i knew you were being serious, sorry I didnt mean for that response to sound condescending. I am just shocked the hard work longer better videos are now pointless to make.



This one I did today actually is funny as hell and I didn't even have to talk

 

[nomis38]

Ok flat printed plate for the bottom.

Heated and bent now.

Drilled out the spots she likes lol. 6 mount points in total.

It kinda looks like I wrapped my bumper in hot shinny leather

Pretty sure the bumper is now stronger then anything else on the car, not sure if thats a good or a bad thing. We will see tomorrow it's supposed to be a clear day.

 

[nomis38]

Hmmmm.....

 

[nomis38]

So the Skids are awesome on the Mojave, The Rear bumper held just fine, The Chassis brace mount as you can see is . Honestly it should have broke before the Diff case hahaha








don't worry the X-Maxx got some too. hahaha. It walked away thankfully!!

 

[nomis38]

Well she is all fixed up.... Every thing has been either re-bent or replaced. Honestly its kinda nice to start using up old parts. I have literally 8 or 9 perfectly good plastic diff cases in a tote.

Damage report:
-Busted diff case
-Bent the thick T2T aluminum rod significantly
-Bent Chassis in the rear a couple of degrees
-Front body post - 1of4 busted
-2 screws missing and 4 super loose

 

[nomis38]

Hmmm why you no countersunk much? 4mm thick "original design"

I SAID COUNTERSUNK!!! 8mm thick

ok much better thank you....


Front

Rear

Now its approved to hit a ramp and 50mph

 

[SrC]

Hmmmm.....

View attachment 339670View attachment 339669View attachment 339668

That wont last long. I hope I am proven wrong.
Great concept however. The OE bumper at top and possibly at the chassis will shatter anyway.
I don't send my Mojo. It's not a send it type of model. But go at it. The Fun is all yours.

 

[nomis38]

That wont last long. I hope I am proven wrong.
Great concept however. The OE bumper at top and possibly at the chassis will shatter anyway.
I don't send my Mojo. It's not a send it type of model. But go at it. The Fun is all yours.

Ive already proven you wrong, that dirty front bumper hit a ramp at 50mph 12 times lolol, I bent the chassis, shattered the diffcase, and bent the t2t brace lol and the skid had 0 damage. I use PLA for bumpers all the time. Its all in the direction in which you print in accordance with the load force direction.

Dude its literally a send type model.... It out bashes all my others.

If you don't clay track race, and you don't send.... What do you do?

 

[RCbuzz]

Hmmm why you no countersunk much? 4mm thick "original design"

View attachment 339792





I SAID COUNTERSUNK!!! 8mm thick

ok much better thank you....


Front
View attachment 339798






Rear
View attachment 339793



Now its approved to hit a ramp and 50mph

Is that TPU?

 

[SrC]

There is a life out there somewhere between Racing a groomed track and Sending it to the moon. One day you will find that place. Until then you are having fun. No disrespect. Just saying.
I certainly send my Noto, MT410 and K6s. I know what that is about. Mojo is not one of them. Gets driven hard, but not to the moon. Trying to is just fruitless to me. I found its driving limits. And I love my Mojo for what it is. Among my favorite RC's to date.
Trust me. I have (9) 6s Arrma rigs here alone. 19 RC's in all.

 

[nomis38]

Here let me help a little more with examples not just words hahhahaha.

X-Maxx, Giant 56118 motor, 250amp heavy ESC, Vitavon and other crap on it. HEAVY!! hahha Edit: 12S lipo 5000 mah super heavy.

No PLA was broken, not even a chip, Scoring and worn down yes, 0 breakage, Again print according to force direction

Is that TPU?

PLA

There is a life out there somewhere between Racing a groomed track and Sending it to the moon. One day you will find that place. Until then you are having fun. No disrespect. Just saying.
I certainly send my Noto, MT410 and K6s. I know what that is about. Mojo is not one of them. Gets driven hard, but not to the moon.
Trust me. I have (9) 6s Arrma rigs here alone. 19 RC's in all.

Ive done racing for years, Also the inbetweener, and now all i do with land vehicles is bash. Been there done it sir.

This wasnt the point, you said, "That wont last long. I hope I am proven wrong", when just up a couple posts you should have seen it was proven wrong, its already been tested

The only reason i said what do you do with yours was rhetorical and banter lol, didnt need answered, i knew the answer. Also the Mojave has taken the cake everytime I go out. Its strong do to the giant lexan body, and it makes it a very effective basher, one of the best bashers to date.

 

[SrC]

Hey its your world, I'm just in it.
Enjoy.
3D prints do work. A great skill to hone.

 

[nomis38]

Hey its your world, I'm just in it.
Enjoy.

I mean i don't post anything that doesn't work and say it does. Period. Just like the XT90 thing dude. NEVER will I post anything that I haven't tested. I don't mind disagreement but if you come in an say it flat out wont work out in the end i'll tear ya up everytime. You said that wont last long, And those plates on the X-Maxx are over a year old.

Again I don't post what I haven't tested.

I am particularly hard on you and a couple others because this is all you do, come in and be like yeah that wont work but good luck, cheers.

 

[SrC]

Keep it coming here dude. That is what its about here. Exchange of ideas. Taking all with a grain of salt in many cases.
I wanted you to prove me wrong. Stated so. Not hating. We all drive differently. Models break differently. I messed with my V1 Mojave way more than you have, for some year snow. It is far from new to me. The weak links and parts etc.
Enjoy your day.

 

[nomis38]

Keep it coming here dude. That is what its about here. Exchange of ideas. Taking all with a grain of salt in many cases.
I wanted you to prove me wrong. Stated so. Not hating. We all drive differently. Models break differently. I messed with my V1 Mojave way more than you have. It is far from new to me. The weak links and parts etc.
Enjoy your day.

I appreciate this response sir. Level headed. Thx. The part that I was pointing out though is it was proven before you even posted. Negating your "that wont last long" Meaning you were being condescending. Unless you just didnt read the thread and skimmed and responded. Maybe thats why you get taken out of context most times, who knows.

 

[SrC]

JBI towers. M2C chassis and braces. Even tried T-bone racing fr and rr bumpers. CF sleeved T2T. Went back to stocker bumpers. Were way better for me.

 

[nomis38]

Agreed I looked at the TBR bumpers and decided to just beef up the stockers as I've snapped many TRB's. I have yet to straight up snap a RPM but they don't make Mojave bumpers sadly.

Also stupidly sick Mojave build you got there!!

 

[SrC]

Yeah TBR company has since folded and closed shop. I prefer the Scale bumper look of this SCT. And the TBR's were too stiff and Lawn darting was horrible with them. Sometimes the TBR's damaging the Bulkhead in the process. A fail.
OE Bumpers also break. More so on some models than others. Depending how you drive. But they are doing their job. Something has to give.