- Messages
- 1,628
- Reaction score
- 1,915
- Location
- Australia
- Arrma RC's
- BigRock 4x4
- Infraction
- Kraton 8S
- Kraton 6s
- Talion
- Typhon 6s
So continuing on from these posts:
https://www.arrmaforum.com/threads/race-spec-kraton-first-race-meet-and-test-drive-video.13942/
https://www.arrmaforum.com/threads/finally-finished-my-kraton-race-spec-build.13464/#post-163752
I thought I'd update you on my Kraton "Race Spec" build.
I am so happy with the result that I decided to make this budget build a little next level and what better way than to install a "Race Spec" motor and esc.
I went with the XeRun XR8 Plus and the 4268SD G2 2200kv initial testing is extremely promising. The reason for the smaller motor is I only run a very short track and don't think the longer can(4274SD) was needed, hopefully heat won't be an issue. I only run 4s on track also, I hope I can get a good setup with the right pinion, I've started with a 16t, but was wishing I had a 14t at hand. I'll have to buy a few different sizes, all my pinions are either way bigger or way smaller.
If anyone has any tips or suggestions please comment below.
https://www.arrmaforum.com/threads/race-spec-kraton-first-race-meet-and-test-drive-video.13942/
https://www.arrmaforum.com/threads/finally-finished-my-kraton-race-spec-build.13464/#post-163752
I thought I'd update you on my Kraton "Race Spec" build.
I am so happy with the result that I decided to make this budget build a little next level and what better way than to install a "Race Spec" motor and esc.
I went with the XeRun XR8 Plus and the 4268SD G2 2200kv initial testing is extremely promising. The reason for the smaller motor is I only run a very short track and don't think the longer can(4274SD) was needed, hopefully heat won't be an issue. I only run 4s on track also, I hope I can get a good setup with the right pinion, I've started with a 16t, but was wishing I had a 14t at hand. I'll have to buy a few different sizes, all my pinions are either way bigger or way smaller.
If anyone has any tips or suggestions please comment below.