Harry infraction
Member
- Messages
- 94
- Reaction score
- 51
Hello arma friends. I bought the LIMITLESS V2 3 days ago and wanted to install my hobbywing 800kv today and unfortunately had to find out that arrma only included the small motor slicer here. But I need the 56mm motor slicer, which is absolutely sold out in Austria and unfortunately also in Germany. I thought well then I'll build my 4274er 2250kv for the time being, which I unfortunately can't do because then the lowest speed would be 250 kmh, which is much, much, much too much. Can I install motor holder and slicer from my infraction because it would be lying around. But I measured that the motor slicer from the limitless V2 is higher. Afraid it doesn't work. Maybe someone has had experience too. I think it's a real shame that arrma doesn't have a 56 slicer here. Thank you for your answers in advance. LG
I have to correct my statement again with the standard slicer which is included I have to translate at least 39spool and 32 main gears that d 168 miles per hour. Omg This standard slicer is absolutely unsuitable for the small motors with high kV. I'm afraid of the new limitlles V2 spool that nothing fits here with the standard of infraction if I were to rebuild.
I have to correct my statement again with the standard slicer which is included I have to translate at least 39spool and 32 main gears that d 168 miles per hour. Omg This standard slicer is absolutely unsuitable for the small motors with high kV. I'm afraid of the new limitlles V2 spool that nothing fits here with the standard of infraction if I were to rebuild.
Last edited: