Lost reverse on Arrma Typhon 3s

[Mrwright]

I increased the punch on my ESC and lost reverse on my Typhon 3s. Help!!

 

[Mike-NLD]

I increased the punch on my ESC and lost reverse on my Typhon 3s. Help!!

Are you sure you were in the punch setting menu mode?

Cause you might have changed your forward-brake-reverse mode into just forward-brake

 

[Mrwright]

Hey Mike! I think I may have. Don't know how to get it back

 

[Mike-NLD]

Hey Mike! I think I may have. Don't know how to get it back

Your manual has a page with settings menu.. Let me check..

Follow the alter ESC settings part..

Wait for 4 beeps before you release to get into run mode.. If you enter that.. And it beeps twice.. You changed that setting.. Put it back to the option that only beeps once..

Turn ESC off..

Start again.. Wait for 2 beeps before you relase to enter punch mode.. Change that..

Turn ESC off..

And youre good to go

 

[Mrwright]

Unfortunately I don't have the menu

 

[Cheapbastard]

Unfortunately I don't have the menu

 

[Mrwright]

Thanks man!!

 

[Mike-NLD]

Heres a video on how to.. ESC programming starts at 1m45

Remember! Make sure your transmitter is turned OFF!

Let us know how things worked out

 

[Mike-NLD]

Did you fix it?

 

[razorrc]

The program card for $11 is well worth it!

 

[jondilly1974]

The program card for $11 is well worth it!

Does that same card work with all the BLX models, BLX120, BLX185, etc, or just the BLX100?

 

[AimlessRC]

Calibrate the throttle after...

Make sure your dual rates on the radio are at 100% and throttle trim is all the way up before calibrating.

 

[razorrc]

Does that same card work with all the BLX models, BLX120, BLX185, etc, or just the BLX100?

I'm pretty sure it does on the BLX185, and would be shocked if it didn't work on the 120. If they're Hobbywing ESCs, it will work.