Max 6 with pigtails

[Peteyk49]

What’s the best/easiet way to solder up pigtails on a max 6 esc? I want to use ec5 connectors since that’s what all my batteries have. I see prebuilt pigtails Online with a connector on each end. Would it be a bad idea to just soldier on one connector and run a plug in pigtail? I’d like to be able to run dual 3s as well as a single 6s lipo. I have a loop plug already. I was just wondering if it was a bad idea having all those connections. I have a buddy that would probably help me out and make a pigtail but I hate asking for help haha. Thanks!

 

[Engineer]

That’s what I did with my Max6. Most of the time I run a single 6s and do so without the harness - but there are times when I want to run 3s in series and I just plug in the series harness. Gives me all the flexibility I want without having extra wiring around when I don’t need it.

 

[Jerry-rigged]

This is what I do. My ESC has a single XT90, and I made a Y harness for when I want to run 2 x 3S. But, I made my wires as short as possible...

 

[Yas]

I did - it keeps all the options open

https://www.arrmaforum.com/attachments/img_20200527_092500-jpg.83097/