ficosk8
Active Member
- Messages
- 68
- Reaction score
- 64
- Location
- Grafing, Bavaria, Germany
- Arrma RC's
- BigRock 4x4
- Kraton 8S
- Mojave EXB
Hi guys,
I developed from a 1/10 used cars (most of the time broken) owner to a Kraton 8S used (but very ok) and new Mojave EXB owner. I bought the Kraton just for the electronics. But now I put other electronics to the Mojave to keep the Kraton 8S.
First I build the Mojave with a used Rocket 4092 and used Ace RC 150A Esc an 18t pinion. The car or the esc were doing just crazy things mostly. I think the Esc was shutting down early so it was mainly very very slow. With a 13t and programming the Esc (LiPo safe off) it ran quite nice last week but only on 50% throttle on the sender. If I went full gas it shut down. So I bought a used 160A Firma Esc. Now I thought it would be going crazy. Yesterday it went with power only in reverse so I changed the phase cables. Color way was not correct. And updated Firmware of esc and programming box. Let timing on 0* since I’m a beginner. And put the 18t for some speed in again.
Now the car ran a few meters on the street clogging on the start. But then it didn’t ran anymore. I pzt. a fresh LiPo 4S thinking that could be the problem. But nothing . It coggs like something would be to heavy to pull. In the air in doesn’t moves the wheels neither
What do you think? I’m so disappointed that I’m about to quit this great hobby
I lengthed the wires from the motor with 14AWG wires. Hadn’t bigger ones. Maybe it could be that
I developed from a 1/10 used cars (most of the time broken) owner to a Kraton 8S used (but very ok) and new Mojave EXB owner. I bought the Kraton just for the electronics. But now I put other electronics to the Mojave to keep the Kraton 8S.
First I build the Mojave with a used Rocket 4092 and used Ace RC 150A Esc an 18t pinion. The car or the esc were doing just crazy things mostly. I think the Esc was shutting down early so it was mainly very very slow. With a 13t and programming the Esc (LiPo safe off) it ran quite nice last week but only on 50% throttle on the sender. If I went full gas it shut down. So I bought a used 160A Firma Esc. Now I thought it would be going crazy. Yesterday it went with power only in reverse so I changed the phase cables. Color way was not correct. And updated Firmware of esc and programming box. Let timing on 0* since I’m a beginner. And put the 18t for some speed in again.
Now the car ran a few meters on the street clogging on the start. But then it didn’t ran anymore. I pzt. a fresh LiPo 4S thinking that could be the problem. But nothing . It coggs like something would be to heavy to pull. In the air in doesn’t moves the wheels neither
What do you think? I’m so disappointed that I’m about to quit this great hobby
I lengthed the wires from the motor with 14AWG wires. Hadn’t bigger ones. Maybe it could be that
Attachments
Last edited: