Big Rock Servo broken, can not turn right, any way to fix it?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

ACCD

New Member
Messages
2
Reaction score
1
Today is the second time I drive, spend around 15 mins , first time I drive around 15 mins. Should I contract horizonhobby for replacement or let them fix for me? Or I just buy another stock servo? Or buy a better servo? Or I can fix this servo?
Pretty sad, Thanks for the help. No hard bashing, just drive on the flat ground, grass, some little rock road.
 
Last edited:
Replacement with spectrum servo will be fine but if you get a different style you will need new servo saver be careful what I buy
I believe I went with the 6250 it works great bolted right up

.https://youtu.be/hMhK6tfkuaY
 
Last edited:
No way the stock servo is only a 7kg servo is way slow and will crap the bed all the time. Annikos 25 or 35 kg with kimbrough 124 or 25t armma servo saver is what does my big rock great.
 
Is the hot racing servo saver available, plus I believe the Kimber 124 heavy duty servo saver is a good alternate choice you might have to do a little rounding on the corners but I hear it's just as good if not better than the stock
 
Questions about fit. I see all the 25 t servos readily available on amazon.



https://vortexhobbies.com/arrma-ser...small&osCsid=e3ad0e4f043238e01cda2878ca3c5994

This one will definitely not sure about the other one.
No way the stock servo is only a 7kg servo is way slow and will crap the bed all the time. Annikos 25 or 35 kg with kimbrough 124 or 25t armma servo saver is what does my big rock great.

The stock servos IMO perform really well they just don't last. 2 batteries and it dies is unacceptable Definitely warranty it.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top