Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
No it wont you need the hot racing alluminum pivot balls for the 3-4s lineWill 1/8 Kraton 6s tie rods work for my Arrma Granite?
I think the 6s rod ends wont fit because the steel link is 5mm in diametter vs 4mm of the 3-4s line call your hobbyshop he might have the alluminum pivot balls in stock of the 3-4s lineThank you!!
So, if i went and bought the 6s tie rods and aluminum pivot balls then i'd be able to install them on my Granite?
I take it back. While much of the slop does come from the servo saver, I recently replaced the Kimbrough servo saver and noticed the servo horn and its pivot balls were really loose. I replaced the servo horn with the Hot Racing aluminum one and it took out a lot of slop. Hopefully it won't wear down too quickly. Unfortunately you can't buy the servo horn by itself, you have to buy it along with the Hot Racing Servo Saver (ATF48SH02)But in my experience, the rest of the steering slop is unavoidable. The slop starts (and ends) at the servo saver.
those look like 8647x or 8646 not 5525 are they?Traxxas 5525 tie rods ends work well for me. They have steel pivot balls and screw straight into the stock arrma tie rods. Just need a spacer of some sort as the pivot balls are narrower than the stock arrma ones.
what kind of black spacers are those and if you can provide the link to them I would really appreciate itTraxxas 5525 tie rods ends work well for me. They have steel pivot balls and screw straight into the stock arrma tie rods. Just need a spacer of some sort as the pivot balls are narrower than the stock arrma ones.
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the largest Arrma RC community for RC enthusiasts that covers all aspects of the Arrma-RC brand!
Register Today It's free! This box will disappear once registered!